#WANSCAM JW0004 REVIEW INSTALL#
#WANSCAM JW0004 REVIEW MANUAL#
#WANSCAM JW0004 REVIEW SOFTWARE#
#WANSCAM JW0004 REVIEW PASSWORD#

FTP Mode: PASV (This camera uses PASV by default.

When the trialР”В®nds, you will need to order a subscription to continue using the service.Р”Р„ssuming you already have a CameraFTP Account, then you need to enter the following info: If Wi-Fi is configured successfully, you can unplug your network cable later.Р”В¬lick FTP Service Settings, you can enter the FTP information as shown in the screenshot below. The wireless password, after done, click Save. Otherwise, click 'Wireless Lan Settings', you will see the screen below.Р”В¬lick Scan to find all available Wi-Fi routers, then select a router to connect. If you had already connected the camera with your wireless router, then skip this step. These steps in the Camera Configuration screen to make sure everything is configured correctly). With CameraFTP's service, most regular setup steps are not required.

#WANSCAM JW0004 REVIEW INSTALL#

(It is recommendedР”Р„fter you log on to the camera, please install the Plug-in:Р”В¬lick 'Sign in', it will display the live view screen:Р”В¬lick Setup, you will see the Setup Main screen.

#WANSCAM JW0004 REVIEW PASSWORD#

The default username is admin, and password is admin. So please download Firefox web browser if you don't have it already. Most IP cameras don't support Chrome, incl. Step 2: Configure the Camera Using the Web-based New model cameras probably have supported ONVIF. )Р”Р‡or CameraFTP VSS to locate this camera, you must manually enter the port number 99. You can use VSS as a cloud-enabled NVR, which requires a PC. Note: This camera is compatible with VSS-based Cloud Recording. ( After you find the camera's IP address, you can stop / uninstall VSS.

#WANSCAM JW0004 REVIEW SOFTWARE#

If your computerР”Вoes not have a DVD/CD drive, then you can download CameraFTP VSS software to find the camera's IP address. Usually you will run the included IP Camera Search Tool to find the camera.

#WANSCAM JW0004 REVIEW MANUAL#

Please refer to the manufacturerРІР‚в„ўs manual for more detailed information. Please read the product manual for detailed instructions. Otherwise, there are several ways to connect the IPР”В¬amera to your Wi-Fi network. If you want to use wired connection, you just need to connect the Ethernet cable. To the network and find IP address 1.1 Connect camera to the network If you have finished these basic steps before, Manufacturer for all camera-related issues and contact us only forР”В¬ameraFTP-related (cloud service / FTP) issues. It may not be accurate or completely up-to-date. The information provided isР”В«ased on our knowledge of the models Wanscam JW0004 Cameras. Replace the product manual from the manufacturer. IR LEDs for Night Vision Up to 30 feet distance for 24-hour surveillanceР”В«asic camera information Video / image resolution.Does not support H.264 video/audio recording by itself, but can be supported via CameraFTP VSS.Continuous image recording to FTP server at a max frequency of 1 image/s.

Motion detection with cloud image recording to FTP server.

Easy WiFi Configuration via a network cable and web browser.

Supports both wired and wireless connection, but not PoE.

Two-way audio, Remote Pan/ Tilt rotate, indoor use.

Supports 640x480 video resolution with up to 30 fps.

Newer models might have added H.264 video recording feature. The camera model JW0004 that we tested is a little old and can only support 640x480 image recording.

In general, we believe Wansview is better suited for cloud recording than Wanscam.

Wanscam network cameras are usually compatible with CameraFTP cloud recording service. Configure Video Profile and Image/Video Recording OptionsР”В¤.1 Configure Video / Image Settings (Resolution, Frame Rate, Bit Rate) Step 2: Configure the Camera Using the Web-based Configuration Tool Step 1: Connect camera to the network and find IP address Camera for Cloud Recording, Monitoring and Playback

Wanscam jw0004 review